Artitec 387.300 Skala H0 Befestigungsketten Militär Transport

Fastening chains for military transport
Etched parts (chains) and resin (wedges).

Assembly
Carefully drill a 1mm deep hole in the middle of the underside of the four T-hooks to glue in the hooks. Glue the hooks into the four drilled holes using superglue.

Unscrew the two bogies with coupling from the heavy-duty truck. Carefully drill a total of four holes with a diameter of 0.6-0.7mm through the wall of the heavy-duty truck at the front and rear.

Glue the vehicle to be loaded onto the heavy-duty truck, glue the loading wedges to the undercarriage and heavy-duty truck.

Hang the four fastening chains into the glued-in hooks and thread the four ends of the fastening chains crosswise through the four drilled holes at the front and rear under the heavy-duty truck. Carefully tighten the four crossed fastening chains and glue each one to the underside of the heavy-duty wagon using a drop of superglue. Screw the two bogies with coupling back onto the heavy-duty wagon.