Märklin 42988 Gauge H0 "Munich-Nuremberg-Express" passenger car set 1, epoch VI

Four pressurized passenger cars of different designs for the RE 4018 from Munich to Nuremberg "München-Nürnberg-Express" of the Deutsche Bahn AG (DB AG). An ABvmsz 184.0 1./2. class, two type Bpmz 295.4 open seating cars, 2nd class, and a type Bpmbdzf 296.3 control car, 2nd class. Basic color scheme traffic red. Operating condition 2017.

highlights
Redesign of the control car
Redesigned interior at ABvmsz
All cars come with LED interior lighting as standard
All cars with current-carrying short coupling heads
Control car with digital decoder mfx
Headlights can be controlled digitally
Main beam can be switched separately and digitally
LED interior lighting can be controlled separately and digitally
Driver's cab lighting can be controlled digitally
Separable, current-carrying clutch that can be controlled digitally
Interior lighting for the entire carriage can be controlled digitally via a decoder in the control car
Prototypical wagon run: Munich – Nuremberg (RE 4018)

All cars with standard built-in LED interior lighting with warm white light-emitting diodes. All cars with live short coupling heads installed as standard. The control car also has an mfx digital decoder. Triple headlights and two red marker lights, conventionally on, can be controlled digitally. High beam can be controlled digitally. LED interior lighting conventionally on, separately digitally switchable. Driver's cab lighting can be controlled digitally. Current-carrying clutch conventionally connected, separately digitally switchable. The interior lighting of the ABvmsz 184.0 and Bpmz 296.3 cars only works in combination with the control car and can be switched on and off digitally using the decoder. Type-specific roof shapes, side walls, underbodies, aprons and interior fittings. Structural features of pressurized wagons such as SIG transitions. ABvmsz 184.0 and Bpmz 296.3 with bogies MD without generator. Control car with type SIG 72 bogies. By removing a panel on the driver's cab side of the control car, a normal coupling can be used for attaching to a locomotive. All cars with printed car route signs and different serial numbers. Minimum radius that can be driven on is 360 mm. Total length over the buffers approx. 113.5 cm.

A passenger car set to go with this can be found in the Märklin H0 assortment under item number 42989. A train locomotive to go with this can be found in the Märklin H0 assortment under item number 39376.