MY SHOPPING CART
Note to EU Toys Directive 2009/48/EC: Warning, not suitable for children under 15.

Viessmann 5229
Multiplexer for light signals

Recommended retail price: 61,95 €

45,03 €
Corresponds to export price of:
45,62 USD
Online
Available from stock
Store Detmold
 
Pcs.:   

Description & specifications

Multiplexer for light signals.

The control module for the new generation of Viessmann light signals with multiplex technology. Equipped with the Viessmann signal bus. Can be controlled via key control panels 5545, 5546 and 5547, via track contacts and digital switching commands in Märklin-Motorola and in NMRA-DCC format. It can be configured for the following uses: - two-aspect or multiple-aspect light signal A two-aspect main signal with the signals "drive" and "stop" requires the 5547 button control panel (for four signals) or a digital address. A three- or four-aspect signal with the additional terms "slow travel" and "maneuvering ban canceled" requires the control panel 5546 (three-aspect, two signals) or 5545 (four-aspect, two signals) or two addresses in digital mode. - Station signal or block signal When configured as a block signal, the module reacts automatically to the transmitted route status. This function requires track occupancy reports with permanent contacts, such as an isolated track side on Märklin tracks or two-rail track sections monitored with the track occupancy detector 5206. Up to two monitored sections are required per signal section. In this operating mode, the module automatically switches to "Drive" when the following section is reported as "free" via the signal bus. If one of the two sections is occupied, the module switches to "Halt". - Your own distant signal or distant signal on the mast The signal module controls the main signal and the associated distant signal or the distant signal of a following signal if it is attached to your own mast. In this case the distant signal is switched to prototypically dark at "Halt". - Interrupt the traction current at "Halt" or switch on the brake generator. With the plug-in train control relay 5228, the module can automatically stop the trains. This can be done either by switching off the traction current before the signal or, in the case of digital systems, even more prototypically by switching to the 5232 brake module (for Märklin-Motorola) or a brake generator (for NMRA-DCC). - Coupled signal The configuration can be used to define whether a signal may only need to display "Stop" and "Slow travel". In this case, too, the module only requires the 5547 button control panel or a digital address. The signal connection is made via a single plug connection. Soft light change between the signal images. With the attachable train control relay 5228, the module can stop the trains automatically. This can be done either by switching off the traction current before the signal or, with digital systems, even more prototypically by switching to the 5232 brake module (for Märklin-Motorola) or a brake generator (for NMRA-DCC). The logic in the signal module ensures that the red button always wins when several buttons are pressed at the same time, both for control via button control panels and via contact tracks. Programming button for the configuration and setting of the digital address, LED for status display.
Manufacturer: Viessmann
Article-No.:5229
EAN:4026602052298
Gauge: Neutral
Power system: all
Product Line:DIGITAL 2
CompatibilityDCC
CompatibilityMotorola
 
Manufacturer price:61,95 €

Documents

  • Betriebsanleitung