Schönwitz 50212 Gauge H0 Conversion set BR 232 / Ludmilla adapter and lighting - red light inside - ESU

Conversion set H0 series 232 / Ludmilla adapter and lighting - red light inside - ESU.

With this conversion set, you have the opportunity to convert your MäTrix Hobby locomotive with a special motor and to provide it with many new functions.

All soldering points that you need to use for installation are already pre-tinned and sufficiently large to ensure smooth installation.

With this article, the red light is preset in the inner light outlet. The interface is designed for ESU decoders.

The following functions can be switched depending on the direction of travel:

Triple peak light - warm white
Tail light - red (inner light outlet)
Main beam - warm white (in the same light outlet as the upper headlight)
Pluggable driver's cab lighting (optional under accessories) - warm white, cold white or yellow


Improved driving characteristics with an ESU 21pin standard or sound decoder (required for the conversion, since the old decoder can no longer be used).

A soldering bridge on the lighting boards can be used to reset at any time whether the red light should be on inside or outside the light outlet.

The set is suitable for the following Märklin H0 models:

- Class 232:
36420 36422 36424 36425 36426 36427 26551 26560
- Class 132:
36421
- Class 234:
36423


The set is suitable for the following Trix H0 models:

- Class 232:
22066 22067 22070 22072 21347
- Class 132:
22071
- Class 234:
22069 21524


The locomotive shown is only an example of use and is not included in the scope of delivery!