ESU 59110 Gauge Neutral LokPilot 5 FX micro DCC/MM/SX, 8-pin NEM652, N gauge, TT, H0

The LokPilot 5 Fx micro is an extremely small function decoder with a footprint of just 8.0mm x 7.0mm and a thickness of just 2.4mm (at the capacitor: 2.9mm).
It is used in all vehicles of nominal sizes N to H0 that do not have a motor output but should still be able to switch light effects.

LokPilot 5 Fx micro decoders are always offered with an 8-pin interface.

The LokPilot 5 Fx micro is a real multi-protocol decoder. It supports the DCC data format as well as Motorola and Selectrix. In the DCC format, 14 to 128 speed levels are as natural as 2- and 4-digit addresses and up to 32 functions. Thanks to RailComPlus, the decoders register fully automatically with a suitable digital control center. It supports all DCC programming modes and thanks to RailCom, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for central units that can only program CVs 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable 16 functions to be triggered. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.