Diesel Locomotive road number 320-001 Servizi Ferroviari, Era V with sound
Order deadline March 31, 2020
A Colossus for the Italians
After its deadline in 1992, the V 320 disappeared to Italy to earn its daily living in construction train service. Starting in 1995, it was available to the track construction firm Servizi Ferroviari SrL (SerFer) as road number T2716 (320-001) to haul freight trains as well as in construction service. Yet due to its "over dimensioned size", it was used rather sporadically so that SerFer was already looking for a buyer in 1998 for this large diesel locomotive and found it in the German track building firm WIEBE.
Prototype: Servizi Ferroviari SrL (SerFer) diesel locomotive, road number 320-001 (former road number V 320 001 and Henschel DH 4000) as it looked in Era V around 1995. With metering boxes on the trucks to the right rear and left rear, with wind deflectors on the cab windows, and with rain gutters above the cab windows.
Model: This locomotive is completely new tooling. The running gear with the main frame and locomotive body are constructed of metal. The locomotive has many separately applied brass parts and separately applied metal parts such as grab irons, metal signs, windshield wipers, etc. The locomotive has a DCC-Digital decoder, extensive sound functions as well as running sounds that vary with the speed, a locomotive whistle, warning horn, compressed air being released, vent sounds, and much more. The locomotive can be operated with AC, DC, Märklin Digital, and MFX. The locomotive has a built-in buffer capacitor, whose parameters can be adjusted. It also has two high-efficiency motors with drive to all axles and a high level of pulling power. The LED white headlights / red marker lights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. There is white LED lighting in the cab that changes over with the direction of travel and that can be turned off. All of the vents include sound. They are prototypically driven and can be turned off. There is smoke exhaust from all of the exhaust stacks and it can be controlled electrically. The engine room lighting / corridor lighting can be controlled. The engine room and cab interior details are modelled. The cab doors can be opened, and Cab 1 has a figure of an engineer. The buffer beams have sprung buffers and separately applied brake lines. There is a factory-installed, electrically working Telex coupler at the back of the locomotive. The front has a prototype coupler. Each factory-installed type of coupler can be replaced by the other type, which is included with the locomotive. Individual round buffers included. Gloves are included with the locomotive.
Minimum radius for operation 1,020 / 40-3/16".
Length over the buffers 71.9 cm / 28-5/16".
Weight approximately 7 kilograms / 15 pounds.
|Power system: ||all|
|Anzahl angetriebene Achsen||6|
|Length over buffer:||719 mm|
|Navigable minimum radius:||1.020 mm|
|Headlights:||Triple headlights and two taillights, alternating with travel direction|
|LED Top illumination||Yes|
|Interior Fittings:||digital control of cabin light|
|Interior Fittings:||digital control of machine light|
|Interior Fittings:||Interior lighting can be retrofitted|
|Manufacturer price:||2990,00 €|