MY SHOPPING CART
Note to EU Toys Directive 2009/48/EC: Warning, not suitable for children under 15.

Schönwitz 11-18-11
constant current source

Recommended retail price: 1,86 €

1,56 €
Corresponds to export price of:
1,63 USD
Online
Available from stock
Store Detmold
 
Pcs.:   

Description & specifications

20mA mini miniature constant current source for LEDs KSQ2.

This "intelligent resistor" always supplies your LEDs with the right current, even with AC voltage.

The electronics in the KSQ2 limit the current to around 20mA, regardless of the supply voltage. Your LED always lights up constantly in a voltage range between 4V and 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC voltage transformer.

Depending on the LED type and input voltage, 11 LEDs can be connected in series. A parallel connection is also possible, then the current is divided between the LEDs.

The KSQ 2 has two connection pads to which a DC or AC voltage is connected and two other pads that serve as output + and -.
A buffer capacitor can also be connected via the connection pad on the bridge rectifier, e.g. to install flicker-free train lighting.

All connection pads are pre-tinned, which allows for easy processing. On the back of the board you will find useful connection information.

Technical specifications

Set current approx.: 20 mA
Operating Voltage - 4V to 24V AC/DC
Dimensions L x W x H approx.: 11 x 8 x 3.5 mm
Approximate weight: 0.35g
Voltage drop at the controller: approx. 1.5 V
Current tolerance: +/- 10% possible
Manufacturer: Schönwitz
Article-No.:11-18-11
EAN:4251319503188
Gauge: Neutral
Power system: all
Dimensions (LxWxH):11 x 8 x 3,5 mm
 
Manufacturer price:1,86 €